TEADIT® double-jacketed gaskets are particularly suited for applications like heat-exchangers and boilers. The gasket is constructed of a soft, heat resistant, non asbestos filler material, which is completely enclosed in a two-piece metal jacket. When pass partition bars are required, we offer a welded pass bar construction. With a welded pass bar arrangement the fluid is retained by the primary seal at the inner diameter of the gasket.

Thus the primary seal maintains its function, providing a seal of higher integrity. Many standard bar configurations are available, special configurations on request.

* the metal jacket covering the filler material prevents contamination
* ensures high elasticity and recovery
* nearly any dimension and shape can be mode
* the welded construction of the bars results in two independent seals:the primary seal at the inner diameter And the secondary seal at the outer diameter.

Standard materials:
Metal jacket: Carbon steel, soft iron, 304, 3161  Filler material: graphite

● Home  ● Products  ● BOGE : | Compressor & Accessories | Air Filter | Dryer | Receiver | Oil/ Water Separator  ● TDT SEALPACK : Stuffing Box Packing | FDA Approved Gaskets | Double-Jacketed gaskets | Spiral-wound gaskets ● HOERBIGER : Compressors ● About Us  ●  Enquiry